Atomlab Pimplite SL [559] Rim

Add this rim to your bench

Rim Data
Manufacturer Atomlab
Model Pimplite SL
ISO Size ISO 559 (26" mtn)
ERD 532 mm
ERD source measured by Karl on new 32h rim; agrees with rim sticker value
Offset drilling 2.5 L, 2.5 R
Rim Bias 0 mm (centered)
Outer width 26.5 mm
Inner width 20.8 mm
Overall height 23.4 mm
Brake wall height
Tire Type clincher
Joint Type Sleeved
Eyelet type Unknown
Weight 596 g
Rim ID 735
Record Status Public
Created Sep 1, 2020 2:04pm
rim profile and dimension rendering
Rim sticker says "ERD 532". The holes are drilled at such an angle that it is hard to get an exact measurement with measuring spokes pointed directly across the rim (the nipples start to not quite lay flat in their angled holes). I got about 533, so I think their value sounds good. Joint is visibly sleeved, but also shows signs of possibly being pinned (punched marks on the bead seat on either side of the seam). I weighed this 32h rim as 596g without the rim strip. -Karl