Ryde Andra 35 [559] Rim
Rim Data | ||
---|---|---|
Manufacturer | Ryde | |
Model | Andra 35 | |
Descriptor | ||
ISO Size | ISO 559 (26" mtn) | |
ERD | 538 mm | |
ERD source | measured by a user, 3mm larger than mfg published value | |
Offset drilling | ||
Rim Bias | 0 mm (centered) | |
Outer width | 26.4 mm | |
Inner width | 22 mm | |
Overall height | 20.5 mm | |
Brake wall height | 11.5 mm | |
Tire Type | clincher | |
Joint Type | Pinned | |
Eyelet type | None | |
Weight | 660 g | |
URL | https://www.ryde.nl/andra-35 |
Metadata | ||
---|---|---|
Rim ID | 567 | |
Record Status | Public | |
Created | Sep 10, 2019 4:49pm |
Rim Brake Model
Mfg published ERD value is 535mm; a user measured 538mm to the bottom of the screwdriver slots. Maybe Ryde publishes a rim extrusion floor diameter and calls it ERD? Some would call this ERD++, meaning the user needs to add in twice the nipple head height of the type of nipple they are using. -Karl
Mfg published ERD value is 535mm; a user measured 538mm to the bottom of the screwdriver slots. Maybe Ryde publishes a rim extrusion floor diameter and calls it ERD? Some would call this ERD++, meaning the user needs to add in twice the nipple head height of the type of nipple they are using. -Karl