Velocity Cliffhanger (pre-2015) [559] Rim
| Rim Data | ||
|---|---|---|
| Manufacturer | Velocity | |
| Model | Cliffhanger (pre-2015) | |
| Descriptor | ||
| ISO Size | ISO 559 (26" mtn) | |
| ERD | 531 mm | |
| ERD source | ||
| Offset drilling | ||
| Rim Bias | 0 mm (centered) | |
| Outer width | 28 mm | |
| Inner width | 21.9 mm | |
| Overall height | 24.8 mm | |
| Brake wall height | 11 mm | |
| Tire Type | clincher | |
| Joint Type | Sleeved | |
| Eyelet type | None | |
| Weight | 580 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Rim ID | 49 | |
| Record Status | Public | |
| Created | Nov 1, 2009 7:45pm | |
NOTE: This is the original version of the Cliffhanger; the extrusion is triangular just like the Dyad/Aeroheat (which are the same extrusion as one another), but overall slightly wider and taller and with thicker walls. This version was replaced by a newer rounded extrusion (visually similar to the Blunt/Dually) beginning in early 2015. If you have a rounded rim, this is NOT the same ERD.
--------
2/19/2010 -- Widths and heights verified. -Karl
--------
2/19/2010 -- Widths and heights verified. -Karl