Hunt 4 Season Gravel Disc [622] Rim
| Rim Data | ||
|---|---|---|
| Manufacturer | Hunt | |
| Model | 4 Season Gravel Disc | |
| Descriptor | ||
| ISO Size | ISO 622 (700c, 29er) | |
| ERD | 592.3 mm | |
| ERD source | ||
| Offset drilling | 3 L, -3 R | |
| Rim Bias | -3 mm (to the left) | |
| Outer width | 24.4 mm | |
| Inner width | 19.2 mm | |
| Overall height | 23 mm | |
| Brake wall height | ||
| Tire Type | tubeless | |
| Joint Type | Sleeved | |
| Eyelet type | None | |
| Weight | 432 g | |
| URL | https://www.huntbikewheels.cc/products/h... | |
| Metadata | ||
|---|---|---|
| Rim ID | 452 | |
| Record Status | Public | |
| Created | Apr 1, 2019 10:25am | |
4/1/19 -- Dims and weight taken on a new rim disassembled to be laced to a different hub.
Note that my ERD measurement greatly differs from Hunt's spec. I suspect this is because they use hex-head nipples that allow the spoke to protrude inwards a good bit further than a conventional 12mm brass nipple. Claimed offset is 3mm, and I measured imprecisely a little closer to 2.5mm. -Karl
Hunt says: "Maxiumum recommended spoke tension:
Front wheel - 130kgf
Rear wheel - 125kgf"
Note that my ERD measurement greatly differs from Hunt's spec. I suspect this is because they use hex-head nipples that allow the spoke to protrude inwards a good bit further than a conventional 12mm brass nipple. Claimed offset is 3mm, and I measured imprecisely a little closer to 2.5mm. -Karl
Hunt says: "Maxiumum recommended spoke tension:
Front wheel - 130kgf
Rear wheel - 125kgf"