HED Big Deal (85mm; using rubber-backed washers!) [559] Rim

Add this rim to your bench

Rim Data
Manufacturer HED
Model Big Deal (85mm; using rubber-backed washers!)
Descriptor
ISO Size ISO 559 (26" mtn)
ERD 567 mm
ERD source
Offset drilling 3.2 L, 3.2 R
Rim Bias 0 mm (centered)
Outer width 85 mm
Inner width 82 mm
Overall height 12.5 mm
Brake wall height
Tire Type tubeless
Joint Type Seamless
Eyelet type None
Weight 455 g
URL
Metadata
Rim ID 327
Record Status Public
Created Dec 2, 2013 9:32am
Approved
Contributed By
rim profile and dimension rendering
26" carbon tubeless fatbike rims!
-------
12/2/13 -- I measured the actual ERD as 565 with the washers supplied by HED. Andy@HED recommends using ~562 to account for carbon flex, etc. Greg is riding some thinner prototypes that are around 350g. Official claimed weight of the current production rims is 580ish; I measured 455g actual. -Karl
-------
12/2/13 -- Hope Pro2 Evo Fatsno 170mm rear hub = L-274.5 & R-273.0 worked well. -Karl/Sam
12/8/13 -- Changed ERD to 564 since spokes are consistently coming out a tad shorter than desired. -Karl

ERD measurement across new rubber-backed nipple washers is ~570mm (with no real compression of the washers)

3/2/15 -- My first build with the new rubber-backed washers: I'm going to try adding 2.5mm to the old ERD with the non-rubber washers. 564.0 + 2.5 = 566.5mm. -Karl
3/2/15 -- +2.5mm worked nicely, but 3.0mm would be even better. Updated specs. -Karl