Kris Holm 29'er XC & Road [622] Rim
Rim Data | ||
---|---|---|
Manufacturer | Kris Holm | |
Model | 29'er XC & Road | |
Descriptor | ||
ISO Size | ISO 622 (700c, 29er) | |
ERD | 603 mm | |
ERD source | ||
Offset drilling | 3 L, 3 R | |
Rim Bias | 0 mm (centered) | |
Outer width | 37.5 mm | |
Inner width | 31 mm | |
Overall height | 20 mm | |
Brake wall height | 11.5 mm | |
Tire Type | clincher | |
Joint Type | Pinned | |
Eyelet type | Single | |
Weight | 815 g | |
URL | http://www.krisholm.com/khu/rims |
Metadata | ||
---|---|---|
Rim ID | 272 | |
Record Status | Public | |
Created | Feb 19, 2010 11:28am |
"New for 2010: The spoke offset pattern has been adjusted slightly to 10 mm offset (5 mm each side) to improve spoke angle at the eyelets." (this doesn't specify if the offset separates or crosses the spokes from opposite flanges.)
(the pre-2010 version has centered drilling, judging by photos)
rim in hand; appears to be a 'new' version. drilling alternates about 3mm either side of center, and the eyelets are angled significantly, meaning this rim will work great if you have a ridiculously wide homemade hub for some reason. ERD ranges from 602 to 603.5mm, so I changed it from 606.5 to 603. i also changed the weight from 795g to my measured 815g. 795 was found on the web somewhere. -Karl
(the pre-2010 version has centered drilling, judging by photos)
rim in hand; appears to be a 'new' version. drilling alternates about 3mm either side of center, and the eyelets are angled significantly, meaning this rim will work great if you have a ridiculously wide homemade hub for some reason. ERD ranges from 602 to 603.5mm, so I changed it from 606.5 to 603. i also changed the weight from 795g to my measured 815g. 795 was found on the web somewhere. -Karl