Mavic CXP33 [622] Rim
Rim Data | ||
---|---|---|
Manufacturer | Mavic | |
Model | CXP33 | |
Descriptor | ||
ISO Size | ISO 622 (700c, 29er) | |
ERD | 597.2 mm | |
ERD source | ||
Offset drilling | ||
Rim Bias | 0 mm (centered) | |
Outer width | 19.2 mm | |
Inner width | 14.3 mm | |
Overall height | 23.5 mm | |
Brake wall height | 9.5 mm | |
Tire Type | clincher | |
Joint Type | Welded | |
Eyelet type | Single | |
Weight | 455 g | |
URL |
Metadata | ||
---|---|---|
Rim ID | 235 | |
Record Status | Public | |
Created | Feb 11, 2010 1:22am |
ERD is an educated guess based on SSD and Q's catalog. it would be wise to measure...
---------
12/19/14 -- Built a wheel with a new-old-stock specimen. Checked and slightly corrected dims and weight. ERD measured as 597.2 (I had estimated 598 based on the published SSD). Unusual eyelet type that is more like a spoke washer that isn't crimped through the outer wall, and has a basket-shaped portion attached that doesn't pull against the inner wall, but prevents nipples from falling into the rim. Seam appears to be sleeved (evidenced by weight imbalance and pinch marks) and also welded (evidenced by flashing on inner surface and lack of visible seam on brake wall). -Karl
---------
12/19/14 -- Built a wheel with a new-old-stock specimen. Checked and slightly corrected dims and weight. ERD measured as 597.2 (I had estimated 598 based on the published SSD). Unusual eyelet type that is more like a spoke washer that isn't crimped through the outer wall, and has a basket-shaped portion attached that doesn't pull against the inner wall, but prevents nipples from falling into the rim. Seam appears to be sleeved (evidenced by weight imbalance and pinch marks) and also welded (evidenced by flashing on inner surface and lack of visible seam on brake wall). -Karl