White Industries Eccentric ENO 130mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | White Industries | |
| Model | Eccentric ENO | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 130 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | rim brake | |
| Drive Interface | threaded, flip-flop (all combos) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 48 mm | |
| Right Flange Diameter | 48 mm | |
| Left Flange Offset | 32.5 mm | |
| Right Flange Offset | 32.5 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 322 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Hub ID | 9 | |
| Record Status | Public | |
| Created | Oct 30, 2009 10:25am | |
This hub has a 12-spline fixed gear cog interface on one side and standard freewheel threading on the other side.
Measurements and weight checked by Karl 3/22/11. Sample weighed 325g (with fixing bolts and washers).
Measurements and weight checked by Karl 3/22/11. Sample weighed 325g (with fixing bolts and washers).