Paul Components Disk WORD 135mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Paul Components | |
| Model | Disk WORD | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 135 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | threaded, standard (1.37x24) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.5 mm | |
| Left Flange Diameter | 56 mm | |
| Right Flange Diameter | 56 mm | |
| Left Flange Offset | 34 mm | |
| Right Flange Offset | 34 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 280 g | |
| URL | http://www.paulcomp.com/diskword.html | |
| Metadata | ||
|---|---|---|
| Hub ID | 85 | |
| Record Status | Public | |
| Created | Feb 10, 2010 8:53pm | |
creates a 52mm chainline (not 42mm!) for singlespeed mountain bikes
9/27/18 -- Dims verified on a fresh 32h specimen. Locknut to freewheel threading shoulder is 22.5mm once the knurls seat into the paint .2mm. -Karl
9/27/18 -- Dims verified on a fresh 32h specimen. Locknut to freewheel threading shoulder is 22.5mm once the knurls seat into the paint .2mm. -Karl