Paul Components Disk WHUB 135mm Front hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Paul Components | |
| Model | Disk WHUB | |
| Descriptor | very non-standard! | |
| Position | Front | |
| Axle Type | 10mm | |
| OLN | 135 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | n/a (front) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.5 mm | |
| Left Flange Diameter | 55 mm | |
| Right Flange Diameter | 55 mm | |
| Left Flange Offset | 41 mm | |
| Right Flange Offset | 41 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 210 g | |
| URL | http://www.paulcomp.com/diskfhub.html | |
| Metadata | ||
|---|---|---|
| Hub ID | 83 | |
| Record Status | Public | |
| Created | Feb 10, 2010 8:47pm | |
This will NOT work with a Pugsley fork because it uses "front" disc rotor spacing, while the Surly 135mm forks are designed to work with "rear" rotor spacing to be compatible with any typical "rear" hub. Internet sources claim that the White Brothers Snowpack fork is set up for this hub, as are unspecified models by Black Sheep.
(I'm not sure if the WHUB uses a 9mm or 10mm axle. Paul's site doesn't clarify that detail... I guessed 10mm, but could also see how they might have made it with a 9mm axle since it's a "front" hub.)
(I'm not sure if the WHUB uses a 9mm or 10mm axle. Paul's site doesn't clarify that detail... I guessed 10mm, but could also see how they might have made it with a 9mm axle since it's a "front" hub.)