Shimano 105 HB-1050 100mm Front hub

Add this hub to your bench

Hub Data
Manufacturer Shimano
Model 105 HB-1050
Descriptor
Position Front
Axle Type 9mm
OLN 100 mm
Brake Compatibility rim brake
Drive Interface n/a (front)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.6 mm
Left Flange Diameter 38 mm
Right Flange Diameter 38 mm
Left Flange Offset 35 mm
Right Flange Offset 35 mm
Mid-Flange Offset 0 mm (centered)
Weight 139 g
URL http://velobase.com/ViewComponent.aspx?I...
Metadata
Hub ID 408
Record Status Public
Created Oct 21, 2018 6:45pm
Contributed By
hub dimension diagram
PLEASE NOTE: Shimano publishes hub dimensions in a relatively confusing manner on bike.shimano.com. They seem to provide the outside-to-outside flange spacing, and an overall offset of the flanges as a whole. Wheelbuilders are interested in the distance from the midpoint between locknut faces to the middle of the flange (not the inside or outside face). When necessary, I convert Shimano's data into useful spoke calculation dimensions with some simple arithmetic, and factor in 3mm thick hub flanges (an approximation). The formula is to divide spacing by two, add or subtract the overall offset, then subtract half of our assumed 3mm flange thickness. Please check the notes to see if the values for this part are derived from Shimano's published data or actual measurements of a hub specimen. -Karl