DT Swiss 240S Single Speed 135mm Rear hub
Hub Data | ||
---|---|---|
Manufacturer | DT Swiss | |
Model | 240S Single Speed | |
Descriptor | ||
Position | Rear | |
Axle Type | 10mm | |
OLN | 135 mm | |
Spoke Interface Type | J-Bend | |
Brake Compatibility | disc, Centerlock | |
Drive Interface | Shimano 1 (SS, <27mm) | |
Internal Gearing | none | |
Dynamo Type | none | |
Spoke Hole Diameter | 2.5 mm | |
Left Flange Diameter | 45 mm | |
Right Flange Diameter | 45 mm | |
Left Flange Offset | 32.5 mm | |
Right Flange Offset | 34.3 mm | |
Mid-Flange Offset | 0.9 mm (to the right) | |
Weight | 243 g | |
URL | https://www.upgradebikes.co.uk/files/tec... |
Metadata | ||
---|---|---|
Hub ID | 365 | |
Record Status | Public | |
Created | Feb 13, 2018 10:23am |
2/13/18 -- Dims & weight from Q catalog. intended to take a single splined cog and some spacers to get desired chainline. -Karl
------
10/28/19 -- Found better dimension chart (see link) and updated left c-f to match. Locknut to flange is 25.5mm. Length of freehub body is not shown in drawing. -Karl
https://www.upgradebikes.co.uk/files/technical/reynolds/DT-Swiss-240s-Technical-Manual.pdf (page 36)
------
10/28/19 -- Found better dimension chart (see link) and updated left c-f to match. Locknut to flange is 25.5mm. Length of freehub body is not shown in drawing. -Karl
https://www.upgradebikes.co.uk/files/technical/reynolds/DT-Swiss-240s-Technical-Manual.pdf (page 36)