DT Swiss 350 100mm Front hub

Add this hub to your bench

Hub Data
Manufacturer DT Swiss
Model 350
Position Front
Axle Type 9mm
OLN 100 mm
Spoke Interface Type J-Bend
Brake Compatibility rim brake
Drive Interface n/a (front)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.5 mm
Left Flange Diameter 39 mm
Right Flange Diameter 39 mm
Left Flange Offset 37.5 mm
Right Flange Offset 37.5 mm
Mid-Flange Offset 0 mm (centered)
Weight 148 g
Hub ID 341
Record Status Public
Created Sep 27, 2017 11:36am
Contributed By
hub dimension diagram
9/27/17 -- Dims & weight taken on a new 32h hub. Flange OD is 50mm leaving plenty of aluminum outboard of the spoke holes; these are probably tough enough for radial lacing, but I would avoid it anyways. -Karl