Novatec D201SB-15 150mm Front hub
| Hub Data |
|---|
| Manufacturer |
Novatec |
|
| Model |
D201SB-15 |
|
| Descriptor |
|
|
| Position |
Front |
|
| Axle Type |
15mm thru |
|
| OLN |
150 mm |
|
| Spoke Interface Type |
J-Bend |
|
| Brake Compatibility |
disc, 6-bolt |
|
| Drive Interface |
n/a (front) |
|
| Internal Gearing |
none |
|
| Dynamo Type |
none |
|
| Spoke Hole Diameter |
2.6 mm |
|
| Left Flange Diameter |
58 mm |
|
| Right Flange Diameter |
58 mm |
|
| Left Flange Offset |
46.7 mm |
|
| Right Flange Offset |
46.7 mm |
|
| Mid-Flange Offset |
0 mm (centered) |
|
| Weight |
0 g |
|
| URL |
https://www.novatecusa.net/product/d201s... |
|
| Metadata |
|---|
| Hub ID |
330 |
|
| Record Status |
Public |
|
| Created |
Mar 28, 2017 3:34pm |
|
10/13/2020 -- Confirmed flange diameters and spacing on a used specimen in a wheel. Note that the page linked to incorrectly says the flange-to-flange spacing of this hub is 71mm; this must be a typo on their part. It is indeed about 93.5mm center-to-center of the flanges, and they seem to be symmetrical between the dropouts. This hub has a weird endcap system: There is a small outer cap that cups over the end of the captive endcaps, and is retained by a small O-ring that sits in a glad on the ID of the small outer cap. With the small outer caps in place, the hub measures 15x150. With the caps removed, it measures 15x143mm, which I don't believe is an existing axle standard. Perhaps they have plug-in endcaps (that would need to overlap the floating captive endcaps and slide through the bearing inner races a ways) that convert this to a QR axle or a 12mm axle diameter. -Karl
