Sarma 135mm fatbike front 135mm Front hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Sarma | |
| Model | 135mm fatbike front | |
| Descriptor | ||
| Position | Front | |
| Axle Type | 9mm | |
| OLN | 135 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | n/a (front) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 58 mm | |
| Right Flange Diameter | 58 mm | |
| Left Flange Offset | 35.3 mm | |
| Right Flange Offset | 47.3 mm | |
| Mid-Flange Offset | 6 mm (to the right) | |
| Weight | 250 g | |
| URL | http://sarmabikes.com/products/fat-bike-... | |
| Metadata | ||
|---|---|---|
| Hub ID | 269 | |
| Record Status | Public | |
| Created | Feb 4, 2014 7:47am | |
According to Dmitry at Sarma, this hub uses a "front" disc offset, which is not compatible with most fatbike forks, such as those made by Surly & Salsa. He also says that it uses 9mm axle endcaps now, but they are working on 10mm caps.
The axle is convertible between 9x135 QR and 15x135 thru-axle. 10x135 is apparently in the works...
The axle is convertible between 9x135 QR and 15x135 thru-axle. 10x135 is apparently in the works...