Surly Ultra New rear road 130mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Surly | |
| Model | Ultra New rear road | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 130 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | rim brake | |
| Drive Interface | threaded, flip-flop (all combos) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.4 mm | |
| Left Flange Diameter | 54 mm | |
| Right Flange Diameter | 54 mm | |
| Left Flange Offset | 33 mm | |
| Right Flange Offset | 31.5 mm | |
| Mid-Flange Offset | -0.8 mm (to the left) | |
| Weight | 328 g | |
| URL | http://www.surlybikes.com/blog/spew/spew... | |
| Metadata | ||
|---|---|---|
| Hub ID | 122 | |
| Record Status | Public | |
| Created | Feb 11, 2010 12:33am | |
***Note that this hub shell is not symmetrical! The flange offsets entered here consider the freewheel-threaded side of the hub to be the drive/right side. Make sure you build thusly or compensate so you don't put spokes on the wrong sides.
11/15/18 -- Ultra New axle kit aluminum inboard spacer stack height: 10.5mm FW side, 8.0mm FX side (measure total height; ignore recess that the outer spacer fits into. Outboard stainless grippy spacers are always 7.0mm (not counting the part that protrudes inside the aluminum spacer) or 9.0mm if you do count the protrusion. Axle is 139.0mm overall, and 84.8mm over the shoulders. FX side 25.5mm from shoulder to bitter end. FW side is 28.0mm shoulder to bitter end. -Karl
11/15/18 -- Ultra New axle kit aluminum inboard spacer stack height: 10.5mm FW side, 8.0mm FX side (measure total height; ignore recess that the outer spacer fits into. Outboard stainless grippy spacers are always 7.0mm (not counting the part that protrudes inside the aluminum spacer) or 9.0mm if you do count the protrusion. Axle is 139.0mm overall, and 84.8mm over the shoulders. FX side 25.5mm from shoulder to bitter end. FW side is 28.0mm shoulder to bitter end. -Karl