SRAM Dual Drive II 135mm Rear hub
Hub Data | ||
---|---|---|
Manufacturer | SRAM | |
Model | Dual Drive II | |
Descriptor | 3-speed internally-geared hub with a cassette freehub body! | |
Position | Rear | |
Axle Type | 10mm | |
OLN | 135 mm | |
Spoke Interface Type | J-Bend | |
Brake Compatibility | rim brake | |
Drive Interface | Shimano 8/9/10/DynaSys (34.95mm) | |
Internal Gearing | 3 speed | |
Dynamo Type | none | |
Spoke Hole Diameter | 2.6 mm | |
Left Flange Diameter | 67.6 mm | |
Right Flange Diameter | 67.6 mm | |
Left Flange Offset | 32.9 mm | |
Right Flange Offset | 18.2 mm | |
Mid-Flange Offset | -7.4 mm (to the left) | |
Weight | 970 g | |
URL |
Metadata | ||
---|---|---|
Hub ID | 119 | |
Record Status | Public | |
Created | Feb 11, 2010 12:05am |
(from 2010 QBP catalog) Hub gear ratio: 1st=73%, 2nd=100%, 3rd=136% 45mm chainline
-----------
11/24/15 -- Original dimensions sourced from Q catalog did not match Dual Drive II hub on hand; updated to match.
Axle threading is uncommon. Major diameter = 10.3mm. 26tpi Slightly larger than Sturmey's 13/32" standard. Axle flats measure at 8.55mm. -Karl
-----------
11/24/15 -- Original dimensions sourced from Q catalog did not match Dual Drive II hub on hand; updated to match.
Axle threading is uncommon. Major diameter = 10.3mm. 26tpi Slightly larger than Sturmey's 13/32" standard. Axle flats measure at 8.55mm. -Karl