Velocity unknown older disc hub (Chosen?) 135mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Velocity | |
| Model | unknown older disc hub (Chosen?) | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 135 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | disc, 6-bolt | |
| Drive Interface | Shimano 8/9/10/DynaSys (34.95mm) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 58 mm | |
| Right Flange Diameter | 58 mm | |
| Left Flange Offset | 34 mm | |
| Right Flange Offset | 21.5 mm | |
| Mid-Flange Offset | -6.3 mm (to the left) | |
| Weight | 298 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Hub ID | 1177 | |
| Record Status | Public | |
| Created | Apr 22, 2022 1:34pm | |
4/22/2022 -- Caution! This is an "older" hub that does not appear to be correctly reflected on Velocity's hub dimension list! Tom at Velocity says that model numbers marked along the OD of the hub flange are from this older generation. Upon disassembly, this looks like it was probably manufactured by Chosen. See photos of this exact specimen on this listing. This hub uses a three-pawl freehub body with flat leaf springs behind the pawls. Both endcaps thread off and have 5mm hexes broached into the ends, and the main axle has 10mm hexes broached into both ends to restrain it while removing the second endcap. Very nice design overall.
Dims & weight taken on this used 32h specimen during a wheel rebuild. Part number on this hub is "h77-32" laser etched onto the OD of the left hub flange. Hub shell simply says "Velocity" between the flanges. -Karl
Dims & weight taken on this used 32h specimen during a wheel rebuild. Part number on this hub is "h77-32" laser etched onto the OD of the left hub flange. Hub shell simply says "Velocity" between the flanges. -Karl