Specialized Axis 1.0 [622] Rim
Rim Data |
---|
Manufacturer |
Specialized |
|
Model |
Axis 1.0 |
|
Descriptor |
|
|
ISO Size |
ISO 622 (700c, 29er) |
|
ERD |
588 mm |
|
ERD source |
measured by Karl; includes common nipple allowance |
|
Offset drilling |
|
|
Rim Bias |
0 mm (centered) |
|
Outer width |
21.9 mm |
|
Inner width |
16.7 mm |
|
Overall height |
26.6 mm |
|
Brake wall height |
9.4 mm |
|
Tire Type |
clincher |
|
Joint Type |
Sleeved |
|
Eyelet type |
None |
|
Weight |
504 g |
|
URL |
|
|
Metadata |
---|
Rim ID |
549 |
|
Record Status |
Public |
|
Created |
Jul 31, 2019 12:46pm |
|
Contributed By |
Karl Stoerzinger |
|
7/31/19 -- This rim is part of a common OEM wheelset by Specialized and is probably not readily available as a bare rim. I measured this specimen during a rear wheel rebuild on a Specialized Roubaix. It was laced to a basic cassette hub with 3x lacing on the drive side and radial non-drive. Joint is sleeved and dimpled/punched for sleeve retention. Four identical rim stickers say "AXIS 1.0 ETRTO 622x17. Internal date sticker says "20/06/2013*G1" (June 20, 2013 denoted in the european DD/MM/YY date format). No other markings besides a small yellow sticker warning about rim wear over time in dirty environments. Rim does not actually say Specialized anywhere. -Karl