Whisky No.9 100W [559] Rim
Rim Data | ||
---|---|---|
Manufacturer | Whisky | |
Model | No.9 100W | |
Descriptor | ||
ISO Size | ISO 559 (26" mtn) | |
ERD | 531 mm | |
ERD source | root of nipple with washer | |
Offset drilling | 12 L, 12 R | |
Rim Bias | 0 mm (centered) | |
Outer width | 100 mm | |
Inner width | 94.5 mm | |
Overall height | 25 mm | |
Brake wall height | ||
Tire Type | tubeless | |
Joint Type | Seamless | |
Eyelet type | Unknown | |
Weight | 735 g | |
URL | https://whiskyparts.co/rims/no9_100w_rim |
Metadata | ||
---|---|---|
Rim ID | 512 | |
Record Status | Public | |
Created | Jun 18, 2019 9:10pm | |
Contributed By | Doug H |
ERD of 531mm was measured by contributor, including nipple washers (emailed to get specifics). Mfg spec ERD is a bit smaller at 526mm, perhaps without the washers?
---
8/9/19 -- Mfg confirmed 12mm offset for all stagger-drilled Whisky rims, and they are going to look into getting this info on their website product pages. ERD might vary a bit on Whisky rims; best to measure it yourself with the nipple washers and nipples you will be using. -Karl
---
8/9/19 -- Mfg confirmed 12mm offset for all stagger-drilled Whisky rims, and they are going to look into getting this info on their website product pages. ERD might vary a bit on Whisky rims; best to measure it yourself with the nipple washers and nipples you will be using. -Karl