Sarma Naran 80 center drilled [559] Rim
| Rim Data | ||
|---|---|---|
| Manufacturer | Sarma | |
| Model | Naran 80 center drilled | |
| Descriptor | ||
| ISO Size | ISO 559 (26" mtn) | |
| ERD | 534 mm | |
| ERD source | ||
| Offset drilling | 11 L, 11 R | |
| Rim Bias | 0 mm (centered) | |
| Outer width | 80 mm | |
| Inner width | 72 mm | |
| Overall height | 24 mm | |
| Brake wall height | ||
| Tire Type | clincher | |
| Joint Type | Seamless | |
| Eyelet type | None | |
| Weight | 650 g | |
| URL | http://sarmabikes.com/products/carbon-ri... | |
| Metadata | ||
|---|---|---|
| Rim ID | 331 | |
| Record Status | Public | |
| Created | Jan 23, 2014 6:43am | |
Carbon fiber double-wall fatbike rim offered in three drilling variations to suit different types of symmetrical or offset wheel builds. All data is from Dmitry Shindyakin of Sarma Bikes. -Karl
NOTE: The photos online now (bikerumor, etc.) show staggered drilling that is less offset than the other two versions of this rim. Dmitry says it is currently 11mm (identical to the 64h version, minus the extra holes) but that the amount of stagger/offset might be reduced on future versions. If you build with one of these rims, measure the actual offset and make sure to factor it into your calculations. -Karl
NOTE: The photos online now (bikerumor, etc.) show staggered drilling that is less offset than the other two versions of this rim. Dmitry says it is currently 11mm (identical to the 64h version, minus the extra holes) but that the amount of stagger/offset might be reduced on future versions. If you build with one of these rims, measure the actual offset and make sure to factor it into your calculations. -Karl