PowerTap G3 and G3C 130mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer PowerTap
Model G3 and G3C
Descriptor
Position Rear
Axle Type 10mm
OLN 130 mm
Spoke Interface Type J-Bend
Brake Compatibility rim brake
Drive Interface Shimano 11 road (36.75mm)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.5 mm
Left Flange Diameter 57 mm
Right Flange Diameter 57 mm
Left Flange Offset 38 mm
Right Flange Offset 17.4 mm
Mid-Flange Offset -10.3 mm (to the left)
Weight 0 g
URL https://prod.quarq.com/wp-content/upload...
Metadata
Hub ID 522
Record Status Public
Created Aug 7, 2019 10:22am
Contributed By
hub dimension diagram
"IMPORTANT: For your safety, the non-drive side of the PowerTap hub must be built with at least a 2x lacing pattern on noramally flanged hubs. Because of the patented PowerTap design, torque is transferred through the hub to the non-drive side. Failure to adhere to this precaution will void the warranty."