Shimano SLX HB-M7010-B 110mm Front hub

Add this hub to your bench

Hub Data
Manufacturer Shimano
Model SLX HB-M7010-B
Descriptor
Position Front
Axle Type 15mm thru
OLN 110 mm
Spoke Interface Type J-Bend
Brake Compatibility disc, Centerlock
Drive Interface n/a (front)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.6 mm
Left Flange Diameter 44 mm
Right Flange Diameter 44 mm
Left Flange Offset 28.2 mm
Right Flange Offset 39 mm
Mid-Flange Offset 5.4 mm (to the right)
Weight 158 g
URL https://bike.shimano.com/en-EU/product/c...
Metadata
Hub ID 508
Record Status Public
Created Jul 2, 2019 5:22am
Contributed By
hub dimension diagram
PLEASE NOTE: Shimano publishes hub dimensions in a relatively confusing manner on bike.shimano.com. They seem to provide the outside-to-outside flange spacing, and an overall offset of the flanges as a whole. Wheelbuilders are interested in the distance from the midpoint between locknut faces to the middle of the flange (not the inside or outside face). When necessary, I convert Shimano's data into useful spoke calculation dimensions with some simple arithmetic, and factor in 3mm thick hub flanges (an approximation). The formula is to divide spacing by two, add or subtract the overall offset, then subtract half of our assumed 3mm flange thickness. Please check the notes to see if the values for this part are derived from Shimano's published data or actual measurements of a hub specimen. -Karl
8/2/19 -- User contrib. Flange offset data adjusted to approximate flange midpoint (see note about Shimano data). -Karl
part image