Velo Orange Grand Cru Touring 135mm Rear hub
Hub Data | ||
---|---|---|
Manufacturer | Velo Orange | |
Model | Grand Cru Touring | |
Descriptor | ||
Position | Rear | |
Axle Type | 10mm | |
OLN | 135 mm | |
Spoke Interface Type | J-Bend | |
Brake Compatibility | rim brake | |
Drive Interface | Shimano 8/9/10/DynaSys (34.95mm) | |
Internal Gearing | none | |
Dynamo Type | none | |
Spoke Hole Diameter | 2.5 mm | |
Left Flange Diameter | 62 mm | |
Right Flange Diameter | 62 mm | |
Left Flange Offset | 37.5 mm | |
Right Flange Offset | 19.5 mm | |
Mid-Flange Offset | -9 mm (to the left) | |
Weight | 350 g | |
URL | https://velo-orange.com/products/grand-c... |
Metadata | ||
---|---|---|
Hub ID | 427 | |
Record Status | Public | |
Created | Dec 27, 2018 11:56am |
Note that this is the older 8/9/10spd version (pronounced phallus-shaped left endcap) and not the newer 11spd version (very little exposed left endcap).
-----
Contributor notes that this hub rides on 6902 bearings, which is 15x28x7. Mfg offers Shimano 8/9/10 or Campy freehub on this hub. -Karl
------
6/26/19 -- Mfg has incorrect dimensions on their webpage. Flange PCDs are 62mm (not 60mm) and 37.5mm left C-F (not 36.5). right C-F is correct (19.5mm). My new 36h specimen weighs 352g without skewer. -Karl
-----
Contributor notes that this hub rides on 6902 bearings, which is 15x28x7. Mfg offers Shimano 8/9/10 or Campy freehub on this hub. -Karl
------
6/26/19 -- Mfg has incorrect dimensions on their webpage. Flange PCDs are 62mm (not 60mm) and 37.5mm left C-F (not 36.5). right C-F is correct (19.5mm). My new 36h specimen weighs 352g without skewer. -Karl