Rohloff Speedhub XXL 190mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer Rohloff
Model Speedhub XXL
Descriptor
Position Rear
Axle Type 10mm
OLN 190 mm
Brake Compatibility disc, Rohloff
Drive Interface single cog driver
Internal Gearing 14 speed
Dynamo Type none
Spoke Hole Diameter 2.7 mm
Left Flange Diameter 100 mm
Right Flange Diameter 100 mm
Left Flange Offset 46.5 mm
Right Flange Offset 46.5 mm
Mid-Flange Offset 0 mm (centered)
Weight 0 g
URL https://www.rohloff.de/en/products/speed...
Metadata
Hub ID 324
Record Status Public
Created Dec 5, 2016 9:34pm
Contributed By
hub dimension diagram
Rohloff for your symmetrical fatbike! This 190mm version appears to use some very specific (even for Rohloff) axle plates, disc mounts, and related hardware to achieve the full 190mm. Karl's hunch is that the internals are likely very closely related to the 170mm version, and the extra 20mm is mostly achieved with the longer endcaps, in effect. Note that the chainline info is identical to the 170mm version excep the beltline, and this may simply be a typo/error from Rohloff.

Chainline is 72mm for 15/16/17t sprockets, 75mm for splined sprockets, and 72mm for belt drive.

Flange diameters are assumed to be the same (100mm) as the 135mm hub (not verified!). -Karl
part image