Salsa Conversion 135/142 **with 150mm Bluto endcaps installed** 150mm Front hub
Hub Data |
---|
Manufacturer |
Salsa |
|
Model |
Conversion 135/142 **with 150mm Bluto endcaps installed** |
|
Descriptor |
|
|
Position |
Front |
|
Axle Type |
15mm thru |
|
OLN |
150 mm |
|
Spoke Interface Type |
J-Bend |
|
Brake Compatibility |
disc, 6-bolt |
|
Drive Interface |
n/a (front) |
|
Internal Gearing |
none |
|
Dynamo Type |
none |
|
Spoke Hole Diameter |
2.6 mm |
|
Left Flange Diameter |
58 mm |
|
Right Flange Diameter |
58 mm |
|
Left Flange Offset |
43.5 mm |
|
Right Flange Offset |
28.5 mm |
|
Mid-Flange Offset |
-7.5 mm (to the left) |
|
Weight |
0 g |
|
URL |
|
|
Metadata |
---|
Hub ID |
288 |
|
Record Status |
Public |
|
Created |
Apr 10, 2015 12:24pm |
|
These dimensions are of the Salsa 135/142 conversion front fatbike hub WITH the Bluto-compatible endcaps installed. Note that since the rotor is aligned by respacing the hub asymmetrically, the wheel must be re-dished by about 7.5mm when switching from the 142 to the 150 endcaps. This is NOT the same geometry as the native 150mm Salsa hub (which has symmetrical flanges). -Karl