Salsa Conversion 170/177 170mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer Salsa
Model Conversion 170/177
Descriptor
Position Rear
Axle Type 10mm
OLN 170 mm
Brake Compatibility disc, 6-bolt
Drive Interface Shimano 8/9/10 (34.95mm)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.6 mm
Left Flange Diameter 58 mm
Right Flange Diameter 58 mm
Left Flange Offset 44.1 mm
Right Flange Offset 37.6 mm
Mid-Flange Offset -3.25 mm (to the left)
Weight 417 g
URL
Metadata
Hub ID 284
Record Status Public
Created Dec 7, 2014 8:32am
Approved
Contributed By
hub dimension diagram
Hub comes with endcaps that allow it to convert between 10x170 and 12x177 without wheel redishing. Drive side endcap has lefthand threads and retains the freehub body. Non-drive side endcap pushes on with a captive O-ring for friction. Tools required to swap caps are an axle vise or strong hands to pull off the left cap, then a 12mm allen key to stabilize the axle while a 5mm allen key (for QR cap) or 17mm wrench (for 12mm cap) is used to unscrew the right cap. -Karl

Weight of 417g is with the (slightly heavier) QR endcaps installed. -Karl