All City Deputy 100mm Front hub
| Hub Data | ||
|---|---|---|
| Manufacturer | All City | |
| Model | Deputy | |
| Descriptor | ||
| Position | Front | |
| Axle Type | 10mm | |
| OLN | 100 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | rim brake | |
| Drive Interface | n/a (front) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.6 mm | |
| Left Flange Diameter | 58 mm | |
| Right Flange Diameter | 58 mm | |
| Left Flange Offset | 34 mm | |
| Right Flange Offset | 34 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 247 g | |
| URL | http://allcitycycles.com/products/hubs/d... | |
| Metadata | ||
|---|---|---|
| Hub ID | 268 | |
| Record Status | Public | |
| Created | Jan 31, 2014 10:46am | |
Mfg says this front hub has a 10mm axle diameter. Perhaps this is a freestyle/BMX standard, or perhaps this is a typo in their specs. I'm blindly trusting them and putting it in here as 10mm. Caveat emptor! -Karl
Spoke hole diameter of 2.6mm is a guess and should be verified. Mfg says these can be used with up to 2.3mm spokes. -Karl
Spoke hole diameter of 2.6mm is a guess and should be verified. Mfg says these can be used with up to 2.3mm spokes. -Karl