Shimano Deore XT FH-M775 135mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer Shimano
Model Deore XT FH-M775
Descriptor
Position Rear
Axle Type 10mm
OLN 135 mm
Brake Compatibility disc, Centerlock
Drive Interface Shimano 8/9/10 (34.95mm)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.5 mm
Left Flange Diameter 44.5 mm
Right Flange Diameter 45.5 mm
Left Flange Offset 33 mm
Right Flange Offset 20 mm
Mid-Flange Offset -6.5 mm (to the left)
Weight 336 g
URL
Metadata
Hub ID 191
Record Status Public
Created Mar 30, 2010 11:47am
Contributed By
hub dimension diagram
PLEASE NOTE: Shimano publishes hub dimensions in a relatively confusing manner on bike.shimano.com. They seem to provide the outside-to-outside flange spacing, and an overall offset of the flanges as a whole. Wheelbuilders are interested in the distance from the midpoint between locknut faces to the middle of the flange (not the inside or outside face). When necessary, I convert Shimano's data into useful spoke calculation dimensions with some simple arithmetic, and factor in 3mm thick hub flanges (an approximation). The formula is to divide spacing by two, add or subtract the overall offset, then subtract half of our assumed 3mm flange thickness. Please check the notes to see if the values for this part are derived from Shimano's published data or actual measurements of a hub specimen. -Karl
All dimensions and weight measured by Karl 3/30/2010. (336g is without a skewer)