Formula high-flange track 120mm Rear hub
| Hub Data | ||
|---|---|---|
| Manufacturer | Formula | |
| Model | high-flange track | |
| Descriptor | ||
| Position | Rear | |
| Axle Type | 10mm | |
| OLN | 120 mm | |
| Spoke Interface Type | J-Bend | |
| Brake Compatibility | rim brake | |
| Drive Interface | threaded, flip-flop (all combos) | |
| Internal Gearing | none | |
| Dynamo Type | none | |
| Spoke Hole Diameter | 2.5 mm | |
| Left Flange Diameter | 62 mm | |
| Right Flange Diameter | 62 mm | |
| Left Flange Offset | 32 mm | |
| Right Flange Offset | 32 mm | |
| Mid-Flange Offset | 0 mm (centered) | |
| Weight | 330 g | |
| URL | http://sheldonbrown.com/harris/hubspecs/... | |
| Metadata | ||
|---|---|---|
| Hub ID | 131 | |
| Record Status | Public | |
| Created | Feb 11, 2010 10:58am | |
Formula makes an excellent basic fixed gear hub! Sometimes available with longer axles to permit respacing for wider frames.
------------
7/21/13 -- For these rear hubs, the shorter axle option is 160mm long, and the longer option is 175mm long. The 160mm axle can really only be used on a 120mm spaced frame due to the length of threading required by the captive-washer track nuts. I also measured the spacing over the shoulders on the axle as about 78.25mm (certainly between 78.20 and 78.30). The cartridge bearing versions of these hubs use a pair of 6000 bearings, in case that info is useful to somebody someday. -Karl
------------
7/21/13 -- For these rear hubs, the shorter axle option is 160mm long, and the longer option is 175mm long. The 160mm axle can really only be used on a 120mm spaced frame due to the length of threading required by the captive-washer track nuts. I also measured the spacing over the shoulders on the axle as about 78.25mm (certainly between 78.20 and 78.30). The cartridge bearing versions of these hubs use a pair of 6000 bearings, in case that info is useful to somebody someday. -Karl