DT Swiss RR 411 asym [622] Rim
| Rim Data | ||
|---|---|---|
| Manufacturer | DT Swiss | |
| Model | RR 411 asym | |
| Descriptor | ||
| ISO Size | ISO 622 (700c, 29er) | |
| ERD | 601 mm | |
| ERD source | ||
| Offset drilling | 3 L, -3 R | |
| Rim Bias | -3 mm (to the left) | |
| Outer width | 21.5 mm | |
| Inner width | 18 mm | |
| Overall height | 21 mm | |
| Brake wall height | 10 mm | |
| Tire Type | clincher | |
| Joint Type | Welded | |
| Eyelet type | None | |
| Weight | 435 g | |
| URL | ||
| Metadata | ||
|---|---|---|
| Rim ID | 373 | |
| Record Status | Public | |
| Created | Apr 11, 2017 6:39pm | |
Tubeless ready. Dims and weight from Q on 4/11/17.
"2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included. The wheel must be built with the supplied PHR washers and Pro Head nipples. The PHR washer must be positioned between the nipple and rim and fit correctly within the radius of the rim. DT Swiss recommends that the contact area between the nipple and PHR washer is greased. ERD and weights shown include PHR washers."
"2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included. The wheel must be built with the supplied PHR washers and Pro Head nipples. The PHR washer must be positioned between the nipple and rim and fit correctly within the radius of the rim. DT Swiss recommends that the contact area between the nipple and PHR washer is greased. ERD and weights shown include PHR washers."