Shimano delete me 100mm Rear hub

Add this hub to your bench

Hub Data
Manufacturer Shimano
Model delete me
Descriptor
Position Rear
Axle Type 9mm
OLN 100 mm
Spoke Interface Type J-Bend
Brake Compatibility rim brake
Drive Interface n/a (front)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 0 mm
Left Flange Diameter 0 mm
Right Flange Diameter 0 mm
Left Flange Offset 0 mm
Right Flange Offset 0 mm
Mid-Flange Offset 0 mm (centered)
Weight 0 g
URL
Metadata
Hub ID 202
Record Status Public
Created Nov 14, 2010 11:02am
Contributed By
hub dimension diagram
PLEASE NOTE: Shimano publishes hub dimensions in a relatively confusing manner on bike.shimano.com. They seem to provide the outside-to-outside flange spacing, and an overall offset of the flanges as a whole. Wheelbuilders are interested in the distance from the midpoint between locknut faces to the middle of the flange (not the inside or outside face). When necessary, I convert Shimano's data into useful spoke calculation dimensions with some simple arithmetic, and factor in 3mm thick hub flanges (an approximation). The formula is to divide spacing by two, add or subtract the overall offset, then subtract half of our assumed 3mm flange thickness. Please check the notes to see if the values for this part are derived from Shimano's published data or actual measurements of a hub specimen. -Karl
delete me